Our Products

Find Your Product

Find the product that best meets your needs based on your industry.

Crown Products™

MMA
CrownMMA Sealer 8701 TDS

This is the premier MMA sealer for direct to concrete. The lower viscosity allows for quick penetration into the concrete for a strong bond and surface reconditioning.

View Products
CrownMMA Base 8702 TDS

This is the MMA mid layer/ body coat for broadcasting, slurry or self-leveling application for achieving thin to thicker coat and/or resurfacing of spalled concretes.

View Products
CrownMMA TopCoat 8703 TDS

This is the MMA high wear and chemical resistance coating. It is a very hard surface for every day all-purpose high performance topcoat.

View Products
CrownMMA ThermalTop 8704 TDS

The Flooring based on CrownMMA Flex-Base and sealed with CrownMMA ThermalTop are especially suitable as for kitchen floors and wash bays. Crown- MMA ThermalTop exhibits excellent thermal shock and high heat resistance.

View Products
CrownMMA FlexPrimer 8801 TDS

This is the premier MMA primer for hard to bond substrates such as quarry tiles and metal. Its unique urethane backbone and flexibility gives excellent bonding to countless surfaces. Not recommended direct to concrete. MUST USE CrownMMA Sealer for direct to concrete application.

View Products
CrownMMA FlexBase 8802 TDS

The CrownMMA Flex-Base is a flexible mid-layer/ body coat. This product is designed for applications that require broadcasting, slurry, or self-leveling to achieve a thin-to-thicker coat or the resurfacing of spalled concretes.

View Products
CrownMMA HyperFlex 8803 TDS

The CrownMMA Hyper-Flex yields a high level of flexibility and elongation property. The product’s high flexibility is ideal for freezers and colder applications. It is also ideal for filling in joints and cracks as well as extreme substrates movements areas.

View Products
CrownMMA FlexTop UV 8804 TDS

This MMA topcoat exhibits excellent flexibility and UV resistance. It is ideal for outdoor applications especially, pool decks and stadiums. CrownMMA Flex- Top UV is particularly advantageous in areas that are exposed to snow, rain, or extreme weather, or require to service heavy vehicular traffic, or foot traffic such as parking lots, balconies, or zoo enclosures.

View Products
CrownMMA Cove 8705 TDS

Specially designed for hanging on wall or wall coating to cove based designed or where quick-patching is required or specified.

View Products
CrownMMA Accelerator 8712 TDS

This MMA is an accelerator for COLD TEMPERATURES. It is ideal at a temperature of 40°F. CrownMMA Accelerator must be used in addition to the amount of 8706 CrownMMA BPO used at the 40°F or 30°F level. CrownMMA Accelerator – product no. 8712 must be first added into the MMA resin, mix thoroughly, then add CrownMMA BPO product no. 8706. As a rule of thumb, add about 0.5oz of CrownMMA Accelerator by volume per gallon of resin @ 39° to 32°F, increase the CrownMMA Accelerator up to 2.0 oz by volume per gallon of resin @ -20°F, increasing the quantity gradually in a consistent linear progression as the temperature decreases. Refer to the CrownMMA Flex BPO and Accelerator chart.

View Products
Urethane
CrownCote 8100 HP

CrownCote™ HP is a clear 2-component high-performance polyurethane-polyurea coating system. It is a low odor, 98% solids, UV-stable coating designed for various conditions. It is a high-performance topcoat with excellent chemical and abrasion resistance. It can be used over any epoxy as an added protective measure and prolongs the base coat. CrownCote™ HP is used as a final topcoat for all Crown Polymers floor coatings systems.

View Products
CrownCote 8150 HS TDS

CrownCote HS is a clear 2-component high solids aliphatic polyurethane coating system. It is a high solid, UV-stable coating designed for over grout as well as a topcoat for all Crown Polymers’ floor coating systems. It is a high performance topcoat with excellent chemical and abrasion resistance used over any epoxy as an added protective measure to prolong the base coat.

View Products
CrownFlex 7260 TDS

CrownFlex 7260 is a 2 component, fast setting, fast curing, solvent free, flexible, high performance, and high solids polyurethane elastomeric coating that can be applied to suitably prepared interior or exterior concrete, plywood and metal surfaces.

View Products
CrownSeal Acrylic Polyurethane Primer/Sealer

CrownSeal Acrylic Polyurethane Primer/Sealer No. 8105 is a low viscosity, two-component acrylic polyurethane designed as a primer for CrownSeal CRU No. 8110 and as a concrete sealer. It is a film forming sealer that leaves the surface with a wet look. It is a non-yellowing UV stable sealer that is available in clear gloss and clear satin. It is VOC Compliant in all states and provinces in North America. It cures to an inert, tough, concrete sealer. It’s recoat window, different than all other polyurethanes, is limitless, just make sure the surface is clean and free of contaminates. It is ideal for use as an irregular surface sealer, such as, cementitious knock-downs, where an acrylic sealer is unacceptable. For added durability, place a second sealer coat. Do not apply at less than 300 sq. ft. (27.9 sq. m.). (Not intended for use as an epoxy coating or flooring overlay primer.)

View Products
CrownSeal CRU

CrownSeal CRU No. 8110 is a two-component abrasion, chemical and stain resistant, UV stable aliphatic polyester polyurethane finish coat. It is available in clear gloss, clear satin and can be pigmented with Crown Polyurethane PigmentPacks™. It is VOC Compliant in all states and provinces in North America. It cures to an inert, tough, impact, abrasion and chemical resistant finish coat. It is resistant to Skydrol, betadine and conventional hot-tire staining. Excellent adhesion to Crown Polymers epoxy system. It requires a primer, CrownSeal Polyurethane Hybrid No. 8105 Polyurethane-Acrylic Primer and Concrete Sealer, when it is applied to properly prepared concrete and cementitious overlays. It is used as an upgraded finish coat on Crown Polymers products and systems used in aircraft hangars, industrial kitchens, automotive showrooms and shop floors, commercial laboratories and research facilities, hospital and health care, wine and spirit processing and other facilities subjected to heavy foot traffic, fork lift traffic and chemical attack.

View Products
CrownSeal WB

CrownSeal No. 8112 is a two-component, low order, abrasion and chemical resistant, UV stable, waterborne aliphatic polyurethane finish coat. It is available in clear gloss, satin, matte and it can be pigmented with Crown Polyurethane PigmentPacks™. It is VOC Compliant in all states and provinces in North America. It cures to an inert, tough, impact, abrasion and chemical resistant finish coat. Excellent adhesion to concrete, cementitious mortars and epoxies. It is used as an upgraded finish coat on Crown Polymers products and systems used in aircraft hangars, industrial kitchens, automotive showrooms and shop floors, commercial laboratories and research facilities, hospital and health care, wine and spirit processing and other facilities subjected to heavy foot traffic, fork lift traffic and chemical attack.

View Products
Urethane Cement
CrownCrete U 810 Skim Coat

CrownCrete U™ SC (Skim Coat) Product No. 810 is a 3-part urethane polymer concrete coating flooring product. This product is easily applied with squeegees, brushes, or rollers depending on the desired look. CrownCrete U SC is a heavy duty pigmented coating typically applied 8 to 16 mils thick depending on the design requirements. It is an all-purpose product designed to be used as a primer, mid-coat, topcoat or seal coat for pigmented broadcast systems. It can also be used for patching and coving when mixed with suitable aggregates.

View Products
CrownCrete-U 818 SL 1/8"

CrownCrete U™ 1/8” SL Product No. 818 is a 3-part urethane polymer concrete self-leveling product. It is a self-leveling slurry applied at 1/8” thick depending on design requirements. It is designed to withstand aggressive chemical attack, thermal shock resistance, or as an underlayment providing superior functional floor.

View Products
CrownCrete-U 814 SL 1/4"

CrownCrete U™ 1/4” Slurry Product No. 814 is a 3-part self-leveling, broadcast-applied urethane polymer concrete and slurry flooring product. It is a heavy duty slurry cementitious urethane flooring material designed to be typically applied at ¼” thickness, or in conjunction with specific design requirements. This product is engineered to withstand aggressive chemical attacks, maintain thermal shock resistance, and act as a superior functional floor underlayment.

View Products
CrownCrete-U 815 Slurry

CrownCrete U™ Slurry Grade Product No. 815 is a 3-part, broadcast-applied urethane polymer concrete and slurry flooring product. It is a heavy-duty slurry cementitious urethane flooring material designed to be typically applied at 1/8” to 1/4" thickness, or in conjunction with specific design requirements. This product is engineered to withstand aggressive chemical attacks, maintain thermal shock resistance, and act as a superior functional floor underlayment

View Products
CrownCrete-U 838 TG

CrownCrete U™ TG (Trowel Grade) Product No. 838 is a 3-part urethane polymer concrete trowel grade product. It is a high density packed heavy duty system applied at 3/8” thick depending upon design requirements. It is formulated to withstand the aggressive environments offering excellent chemical resistance and superior thermal shock resistance with top of the line functional performances of the CrownCrete U family.

View Products
CrownCrete-U 839 Screed Grade

CrownCrete U™ Screed Product No. 839 is a 3-part, urethane polymer concrete. It is a heavy-duty rake and trowel applied or by the use of a screed box and trowel finished from a ¼” to ½” thickness. This product is part of CrownCrete U ™ family designed for aggressive environment area while offering the ease of application and quick return to services. The product can use used as a stand-alone or system design for looks and performances.

View Products
CrownCrete-U 811 Covebase

CrownCrete U™ Cove Product No. 811 is a 3-part urethane polymer concrete Cove Base product. It is designed to withstand aggressive chemical attack, thermal shock resistance, and can be used as a patching materials. CrownCrete U Cove is an integral part of the CrownCrete U flooring family of products. The vertical portion can be installed to any height at 1/16" to 1/4" thickness.

View Products
CrownCrete-U Accelerator

Great to promote in cold temperature cure. Available Upon Request.

View Products
Polyaspartic
CrownCote HB

CrownCoteHB is a clear 2-component versatile high-build polyurethane coating system. It has low odor, is UV-stable, and formulated to exceed performance demands for multi-purpose floor coatings. CrownCote HB has good chemical and abrasion resistance that is designed to be used over an epoxy primer or over existing epoxy, or even as a cap coat for decorative and commercial floor coatings. CrownCote HB is uniquely formulated for tough commercial floor coating performance demands. It can also be applied directly to various substrates. CrownCote HB is best suited to be used as protective or final top coat over colored quartz and decorative chips.

View Products
CrownCote PA

CrownCote PA is a clear 2-component versatile high build fast setting polyaspartic coating system. It has low odor, UV-stable coating designed for multipurpose floor coatings performance demand. CrownCote PA has good chemical and abrasion resistance used over an epoxy primer or over existing epoxy or used as a cap coat for decorative and commercial floor coatings system. CrownCote PA is uniquely formulated for tough commercial flooring coating performance demand. It is an all-purpose topcoat coating product. It can also be applied directly to various substrates. CrownCote PA is best suited to be used as protective or final top coat over colored quartz and decorative chips

View Products
CrownPro Polyaspartic High Solids Coating

CrownPro No. 8175 is a two-component abrasion, chemical and stain resistant, UV stable fast curing polyaspartic top coat. It is available in clear gloss and can be pigmented with CrownPigment PigmentPacks. It is VOC Compliant in all states and provinces in North America. It cures to an inert, tough, impact, abrasion and chemical resistance finish coat. It is resistant to Skydrol, betadine and conventional hot-tire staining. Excellent adhesion to Crown Polymers epoxy system. It requires a primer, CrownSeal No. 8105 Acrylic Polyurethane Primer and Concrete Sealer, when it is applied to properly prepared concrete and cementitious overlays. CrownPro No. 8175 is used as an upgraded top coat on Crown Polymers products and systems used in aircraft hangars, industrial kitchens, automotive showrooms and shop floors, commercial laboratories and research facilities, hospital and health care, wine and spirit processing and other facilities subjected to heavy foot traffic, fork lift traffic and chemical attack.

View Products
Epoxy
CrownPrime 7021

CrownPrime 7021 is a 2-component, high solids, liquid applied, epoxy - polyamine primer with unique penetrating characteristics. CrownPrime 7021 is ANSI/NSF 61 approved for direct contact with potable water.

View Products
CrownPrime 7022

CrownPrime 7022 is a 2-component, high solids, liquid applied, epoxy - polyamine filler surfacer with unique characteristics of sealing pores in concrete

View Products
CrownSeal 8314 SBE

CrownSeal SBE is a traditional 2-part solvent-based polyamide epoxy floor coating. It is a breathable coating that has the capability of allowing high moisture vapor to escape from the concrete. It is recommended to be applied directly to the concrete as a penetrating sealer when the concrete surface shows sign of weakness or deterioration. CrownSeal SBE cures from the bottom up preventing outgassing during topping application. SBE can be used as a standalone system on concrete with high moisture readings. SBE is formulated to reinforce the surface of weakened concrete with maximum bonding capability. CrownSeal SBE is also excellent for dust-proofing large storage warehouses.

View Products
CrownSeal 8316 Hybrid

CrownSeal Hybrid is 2-part solvent-based polyamide-mannich epoxy floor coating. It is a semi-breathable coating that allows high moisture vapor to escape from the concrete. CrownSeal Hybrid is designed to be applied directly onto concrete as a sealer/primer or onto damp or hard-to-dry concrete. This product offers fast cure to prevent outgassing during topping application. It can be used as a stand-a-lone coating for concrete with high moisture readings or as a general- purpose primer. CrownSeal Hybrid’s low viscosity penetrates deep into the concrete substrates resulting in excellent adhesion. This product is also an ideal primer for oil contaminated concrete substrates.

View Products
CrownShield 8303 MVB TDS

CrownShield™ MVB™ is a clear 2-component,100% solids, low odor, low viscosity epoxy that is specifically formulated as a moisture barrier coating to treat new and existing concrete floors with high moisture and high pH.

View Products
CrownShield 8313 WB

CrownShield™ WB is a low VOC, 2-component water-based polyamide epoxy floor coating. It has a breathable capability that allows moisture vapor to escape from the concrete.

View Products
CrownGlaze 8321

CrownGlaze™ is a 2-component, low odor, 100% solids, thermosetting epoxy that features ease of application. This is a general-purpose epoxy coating product that can be applied directly to properly prepped substrates or as a body and cap coat.

View Products
CrownShield® Superior All-n-One Epoxy Thru-Product

CrownShield No. 8320 is a high-performance hybrid (Bis. F and Bis. A) 2-component epoxy. Featuring outstanding abrasion and chemical resistance. It is a low viscosity, low odor, 100% solids thermosetting epoxy designed especially for challenging flooring environments, such as industrial kitchens, commercial laboratories and wine and spirit processing facilities subjected to heavy foot traffic, fork lift traffic and chemical attack, specifically food acids. This is a Thru-Product that can be applied directly to properly prepared substrates as a primer, body coat (with/without aggregate) and top coat.

View Products
CrownGuard 8301-S, 8301-F, 8301-H

CrownGuard 8301-S :“S” – Standard Curing Hardener allows an application ranging between 50ºF to 80ºF. This hardener is our primary work- horse, a well-rounded system, perfect for versatile applications.

CrownGuard 8301-F :“F” – Fast Curing Hardener designed for faster set times, or lower temperature application ranging between 40ºF to 60ºF.

CrownGuard 8301-H :“H” – Hot Curing Hardener is a slow cured curative designed for higher temperature application ranging between 80º to 90ºF.

View Products
CrownShop 8302, 8302-F, 8302-H

CrownGuard 8302-S :“S” – Standard Curing Hardener allows an application ranging between 50ºF to 80ºF. This hardener is our primary work- horse, a well-rounded system, perfect for versatile applications.

CrownGuard 8302-F :“F” – Fast Curing Hardener designed for faster set times, or lower temperature application ranging between 40ºF to 60ºF.

CrownGuard 8302-H :“H” – Hot Curing Hardener is a slow cured curative designed for higher temperature application ranging between 80º to 90ºF.

View Products
CrownShield HD 8327

CrownShield HD, is a 2-component clear epoxy floor coating designed for decorative metallic systems. It is a 100% solids, moisture-insensitive, and non-shrink.

View Products
CrownClear HD 8326

CrownClear, is a 2-component clear epoxy floor coating designed for decorative metallic systems. It is a high-solids, moisture-insensitive, and nonshrink.

View Products
CrownCove 8312

CrownCove™ is a clear, 2-component, 100% solids, and thermosetting thixotropic epoxy designed specifically for vertical applications where sag resistance is desired. Formulated to be hand-trowel applied at 4” or 6” or more, such as 6” height with 1” radius cove. CrownCove ™ offers a decorative or industrial cove demanding a seamless floor to wall built system. CrownCove ™ can also be used with aggregate to be used as a patching system for concrete floors.

View Products
Epoxy Accelerator Pack

Great to promote in cold temperature cure. Available Upon Request.

View Products
CrownShield®CrownPrime WB Low Viscosity Epoxy Primer & Coating

CrownPrime No. 8201 is a high performance 2-component waterborne epoxy primer and coating. It is designed to bond to properly prepared concrete substrates that may have been contaminated by sodium silicate, potassium silicate or lithium silicate surface hardeners or curing agents. It contains no migratory plasticizers, phenols or unreacted amines that migrate out of competitors primers, leading to adhesion problems, especially when concrete moisture problems exist.

  1. It can be used as cure and seal over fresh concrete meeting ASTM C309, ASTM C1315 and ASSHTO M148.
  2. It is the only primer formulated for use under CrownShield MVB No. 8303 Moisture Vapor Barrier Epoxy.
  3. In addition, it can be used under all other Crown Polymers epoxy and polyurethane products and systems.

View Products
CrownPrime WB Epoxy Primer and Economical Coating

CrownPrime No. 8202, two of the three components are supplied Crown Polymers, the third component, potable water, is field added, but only after the A and B Components are properly mixed. It cures rapidly and it can be applied to dry or damp concrete. It is available in clear or it can be pigmented with CrownPigment No. 6100 PigmentPack.

  1. It is designed as a primer for epoxies and pigmented polyurethanes.
  2. It can be top coated creating an economical thin mil epoxy coating.

View Products
CrownShield® Pigmented Epoxy Binder for Vinyl Chips

CrownShield No. 8355 is a 2 component, high build, high pigment load epoxy binder that is especially designed to receive CrownFlake System vinyl 1/8 inch and 1/4 inch chips and flakes. It is self-priming and it is formulated as a moisture tolerant epoxy binder and bonds tenaciously to dry or damp concrete. It can be applied directly to “saturated surface dry” (SSD) concrete slabs on grade (with no standing water). The high pigment load design means that it easily hides concrete between 160 to 200 square feet (14.9 to 18.9 sq. m) in a single coat application. It has amble working time for cut-ins, placement and broadcasting the vinyl chips. CrownShield No. 8355 Accelerator (6 wt. oz. per 2 gal) is available when rapid cure is required.

View Products
CrownTerrazzo Thin Set Epoxy Terrazzo

CrownTerrazzo No. 8370 is a pigmented two-component epoxy binder that is used to create the most decorative floors in the construction industry. It is formulated to meet the physical properties of the NTMA (National Terrazzo and Mosaic Association), TTMAC (Terrazzo, Tile and Marble association of Canada) and Crown Polymers thin-set terrazzo flooring standards. It is installed at a normal thickness of 3/8 inch (9.5 mm), but can be applied as thin as 1/4 inch (6.35 mm). The thickness of the installation will be affected by the aggregate sizes. The most common chips are marble, which naturally occur in different colors and MOH’s hardness. Recycled glass adds color and a three-dimensional depth, while Mother of Pearl, other aggregates and pigment colors are incorporated to create unique “one of a kind” looks.

View Products
CrownFlex Semi-Rigid Epoxy LV

CrownFlex No. 8502 is a two-component, low viscosity, 100% solids, semi-rigid epoxy membrane, and joint sealant and crack filler. It features a combination of excellent adhesion and elongation not available in general purpose epoxy. It is formulated to provide the armoring of concrete joint edges and minimizing the deterioration of concrete joint/crack edge from impact. It is available in standard cure and fast cure. It is used for embedding detector wire loops for traffic signal, electric gates and robotics. CrownFlex No. 8502 should be used in lieu of elastomeric sealants that meet ASTM C920 Standard Specification for Elastomeric Joint Sealants which do not armor the concrete joint edges. It is used on floors, joints and cracks subjected to heavy foot traffic, fork lift traffic and chemical attack, specifically food acids. In addition, it is used as an epoxy membrane for waterproofing and crack dampening under epoxy coating and flooring systems. As a membrane under thin set epoxy terrazzo it meets NTMA and TTMAC requirements.

View Products
CrownFlex Semi-Rigid Epoxy MV (Thixotropic)

CrownFlex No. 8503 is a two-component, medium viscosity, 100% solids, semi-rigid epoxy thixotropic cove paste and joint sealant and crack filler. It features a combination of excellent adhesion and elongation not available in general purpose epoxy. It is formulated to provide cove mortar to when used with silica sands or decorative color quartz aggregate and for armoring of concrete joint edges and minimizing the deterioration of concrete joint/crack edge from impact. It is available in standard and fast cure. It is used for embedding detector wire loops for traffic signals, electric gates and robotics. CrownFlex No. 8503 should be used in lieu of elastomeric sealants that meet ASTM C920 Standard Specification for Elastomeric Joint Sealants which do not armor the concrete joint edges. It is used on floors, joints and cracks subjected to heavy foot traffic, fork lift traffic and chemical attack, specifically food acids. In addition, it is used as an epoxy membrane for waterproofing and crack dampening under epoxy coating and flooring systems. It can also be used as a “cove adhesive” for hanging semi-rigid prefabricated cove.

View Products
CrownShield® Semi-Rigid LV Epoxy Mortar Binder

CrownShield No. 8520 is a multi-functional, low viscosity, semi-rigid, 100% solids, moisture tolerant 2-component epoxy mortar binder. It meets ASTM C881 Type II, Grade 1, Class B and Class C and AASHTO M235 Type II, Grade 1, Class B and Class C. It is low viscosity, low odor, 100% solids thermosetting epoxy designed especially for a mortar binder. It is easy to mix, 1:1 mix ration by volume. It is self-priming, meaning it can be installed direct to properly prepared Portland cement concrete. Crown Polymers offers a number of up-grade top coats and finish coats, if they are required. Aggregate Load:

  1. Trowel Mortar Aggregate by Volume: 6 to 7 parts tri-blend aggregate and 1 part Epoxy Mortar Binder.
  2. Self Leveling Aggregate (Crown Polymers No. SP603 Slurry Sand) 3 gal mixed epoxy to 1 bag aggregate.
  3. Liquid placed at 30 - 40 mils. Broadcast Aggregate Load (30 Mesh), uniform in size, washed dried and bagged 0.70 to .075 pounds per square foot per lift.

View Products
CrownShield® Semi-Rigid MV Epoxy Mortar Binder

CrownShield No. 8521 is a multi-functional, medium viscosity, semi-rigid, 100% solids, moisture tolerant 2-component epoxy mortar binder. It meets ASTM C881 Type III, Grade 1, Class B and Class C and AASHTO M235 Type III, Grade 1, Class B and Class C. It is medium viscosity, low odor, 100% solids thermosetting epoxy designed especially for a mortar binder. It is easy to mix, 1:1 mix ration by volume. It is self-priming, meaning it can be installed direct to properly prepared Portland cement concrete. Crown Polymers offers a number of up-grade top coats and finish coats, if they are required. Aggregate Load:

  1. Trowel Mortar Aggregate by Volume: 6 to 7 parts tri-blend aggregate and 1 part Epoxy Mortar Binder.
  2. Self Leveling Aggregate (Crown Polymers No. SP603 Slurry Sand) 3 gal mix epoxy to 1 bag aggregate.
  3. Liquid placed at 30 - 40 mils. Broadcast Aggregate Load (30 Mesh), uniform in size, washed dried and bagged 0.70 to .075 pounds per square foot per lift

View Products
Novolac
CrownPro AcidShield 7350

CrownPro AcidShield 7350 is a multifunctional phenol novolac resin that is extremely chemical resistant with a high heat deflection temperature. CrownPro AcidShield 7350 is a thick film novolac lining designed to cure at ambient temperature to provide exceptional corrosion protection for surfaces in severe chemical and physical environments.

View Products
CrownPro AcidShield 7500

CrownPro AcidShield 7500 is a multifunctional phenol novolac resin that is extremely chemical resistant with a high heat deflection temperature. CrownPro AcidShield 7500 is a thick film novolac lining designed to cure at ambient temperature to provide exceptional corrosion protection for surfaces in severe chemical and physical environments.

View Products
Acrylic
CrownSeal™ WB LV Acrylic Grout and Sealer

CrownSeal No: 8101 is a single component, waterborne, ultra violet stable, high-performance, fast drying acrylic emulsion. It is used as a vinyl chip grout coat, or as a concrete and cementitious overlayment sealer. It is available in clear or it can be pigmented with Crown Polymers PigmentPack.

  1. Grout coat for CrownFlake vinyl chips. Place at 200 sq. ft. (18.6 sq. m.) per gallon.
  2. Sealer for Concrete and Cementitious Overlays: Place at 300 to 350 sq. ft. (27.9 to 32.5 sq. m.) per gallon.

View Products