×
Case Studies

Industrial Floors

Parking Garage Double Broadcast

Before
After

Below grade parking garage had multiple deep cracks due to improper joint placement. New joints were cut and all joints and cracks were filled with Product 505, Crown Flex Joint Sealer after prep. The contractor then applied a double broadcast system consisting of Product 323, Crown Shield 40-2 pigmented, for base coat and intermediate coat, broadcasted with a 40 mesh silica sand. Top coated with Product 320, Crown Shield 50 pigmented, with # 36 aluminum oxide back rolled on ramps going in and out of garage. Product 359, Crown Shield Line Striping finished the job.

Products Used

Crown Flex Joint Sealer

CrownFlex™Joint Sealer, Product No. 505 is a 100% Solids, Moisture-insensitive, Non-shrink, Two (2) Component Modified Epoxy Joint Filler.

Read More
320 CrownShield® 50

CrownShield® 50, Product No. 320 is a two-component straw (Clear) or pigmented epoxy floor coating or epoxy polymer concrete (EPC) when aggregate is added. It is a 100% solids, moisture-insensitive, non-shrink, nearly no odor during application.

Read More
323 Crown Shield 40-2

CrownShield® 40-2, Product No. 323 is a two-component pigmented modified epoxy floor base coating or epoxy polymer concrete (EPC) when aggregate is added. It is a 100% solids, moisture-insensitive, non-shrink, nearly no odor during application. It is not a top coat.

Read More
 
359 -CrownShield Line Striping

CrownShield® Line Striping, Product No 359 is a 100% solids, non-shrink, moisture-insensitive, two-component modified high-modulus smooth epoxy coating formulated to adhere and cure on damp or dry wood, steel and concrete surfaces.

Read More